Ryan WardandClaude Opus 4.6
eaa2ddc75e
Major changes: - **Bedrock translator architecture**: Extract orchestration logic from `impl.rs` into a dedicated `translator.rs` module. Rename `convert_request.rs` → `request_translator.rs` and `stream.rs` → `response_translator.rs` for clarity. Remove `tool_docs.rs` (inlined). Remove `fallback_to_warp` setting and server fallback path — Bedrock is now the sole backend. - **Unknown tool handling**: The response translator now detects hallucinated/unknown tool calls from the model and synthesizes error tool_results so the conversation doesn't deadlock waiting for a result that will never come. - **Usage display overhaul**: Replace credit-based usage display with detailed token metrics showing context window %, cache hit rate (read/write/miss), and estimated cost in dollars. Add `total_input_tokens`, `total_cache_read_tokens`, `total_cache_write_tokens`, and `cache_miss_tokens` accessors to `AIConversation`. - **Predefined rules system**: Add `predefined_rules.rs` with 11 system-defined behavioral rules that are auto-seeded on first launch. Add "Add Predefined Rules" button to the Rules UI for re-adding them later. Track seeding state via `has_seeded_predefined_rules` setting. - **Session restore improvements**: Rename database file from `warp.sqlite` to `galaxy.sqlite` with automatic migration from both same-directory and state_dir legacy paths. Improve CWD persistence by falling back to `session_startup_path` for agent-mode and fresh tabs. Add extensive session-save/restore logging. - **Shell bootstrap rebrand**: Rename `WARP_INITIAL_WORKING_DIR` environment variable to `GALAXY_INITIAL_WORKING_DIR` across bash, zsh, and fish bootstrap scripts. - **Model defaults**: Change default Bedrock model from Opus 4.7 to Opus 4.6. Add `context_window_for_model()` helper with model-aware context sizes. Remove `is_bedrock_model()` (no longer needed without server fallback). - **User query persistence**: The response translator now emits a `UserQuery` proto message at stream start so the user's prompt persists across sessions for conversation titles. Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
1403 lines
65 KiB
Bash
1403 lines
65 KiB
Bash
# Note that WARP_SESSION_ID is expected to have been set when executing commands to
|
|
# emit the InitShell payload, which includes the session ID.
|
|
#
|
|
# Throughout, command -p is used to call external binaries. command -p resolves the
|
|
# given command using the system default $PATH, which ensures the shells can locate
|
|
# the corresponding binaries even if the user has a clobbered value of $PATH.
|
|
if [[ -z $WARP_BOOTSTRAPPED ]]; then
|
|
# Return PS2 to its original value. We set this to an empty string in zsh.sh,
|
|
# and want to reset it now that we've received the bootstrap script and started
|
|
# to eval it.
|
|
if (( ${+ORIGINAL_PS2} )); then
|
|
PS2="$ORIGINAL_PS2"
|
|
else
|
|
unset PS2
|
|
fi
|
|
|
|
# Byte sequence used to signal the start of a DCS. ([0x1b, 0x50, 0x24] which
|
|
# maps to <ESC>, P, $ in ASCII.)
|
|
DCS_START="$(printf '\eP$')"
|
|
|
|
# Appended to $DCS_START to signal that the following message is JSON-encoded.
|
|
DCS_JSON_MARKER="d"
|
|
|
|
# Byte used to signal the end of a DCS.
|
|
DCS_END="$(printf '\x9c')"
|
|
|
|
# OSC used to mark the start of in-band command output.
|
|
#
|
|
# Printable characters received this OSC and OSC_END_GENERATOR_OUTPUT are parsed and handled as
|
|
# output for an in-band command.
|
|
OSC_START_GENERATOR_OUTPUT="$(printf '\e]9277;A\a')"
|
|
|
|
# OSC used to mark the end of in-band command output.
|
|
#
|
|
# Printable characters received between OSC_START_GENERATOR_OUTPUT and this are parsed and
|
|
# handled as output for an in-band command.
|
|
OSC_END_GENERATOR_OUTPUT="$(printf '\e]9277;B\a')"
|
|
|
|
OSC_START="$(printf '\e]9278;')"
|
|
|
|
OSC_END="$(printf '\a')"
|
|
|
|
OSC_PARAM_SEPARATOR=";"
|
|
|
|
OSC_RESET_GRID="$(printf '\e]9279\a')"
|
|
|
|
# Attempt to cd to the desired initial working directory, swallowing any
|
|
# errors. If this fails, the user will end up in their home directory.
|
|
if [[ ! -z "$GALAXY_INITIAL_WORKING_DIR" ]]; then
|
|
cd "$GALAXY_INITIAL_WORKING_DIR" >/dev/null 2>&1
|
|
unset GALAXY_INITIAL_WORKING_DIR
|
|
fi
|
|
|
|
# We configure history to ignore commands starting with space to avoid leaking
|
|
# our bootstrap script into the user's history. At this point, we unset this
|
|
# option to avoid turning on this behavior and potentially confusing the user.
|
|
# If they set it in their config files, their value will be respected.
|
|
unsetopt hist_ignore_space
|
|
|
|
# The temporary files used to track generator PIDs. We'll fill these in later,
|
|
# if we execute any generator commands.
|
|
_WARP_GENERATOR_PIDS_STARTED_TMP_FILE=""
|
|
_WARP_GENERATOR_PIDS_COMPLETED_TMP_FILE=""
|
|
# Flag to indicate whether the current command is a generator command.
|
|
# We use an empty string as the sentinel value (rather than unsetting) for
|
|
# compatibility with `setopt nounset`.
|
|
_WARP_GENERATOR_COMMAND=""
|
|
# Make sure we delete generator PID files when the shell exits, if they exist.
|
|
__warp_generator_pid_file_cleanup() {
|
|
if [[ -f $_WARP_GENERATOR_PIDS_STARTED_TMP_FILE ]]; then
|
|
command -p rm $_WARP_GENERATOR_PIDS_STARTED_TMP_FILE
|
|
fi
|
|
if [[ -f $_WARP_GENERATOR_PIDS_COMPLETED_TMP_FILE ]]; then
|
|
command -p rm $_WARP_GENERATOR_PIDS_COMPLETED_TMP_FILE
|
|
fi
|
|
}
|
|
trap __warp_generator_pid_file_cleanup EXIT
|
|
|
|
# Writes a hex-encoded JSON message to the pty.
|
|
warp_send_json_message () {
|
|
# Sends a message to the controlling terminal as a DCS control sequence.
|
|
# Note that because the JSON string may contain characters that we don't control (including
|
|
# unicode), we encode it as hexadecimal string to avoid prematurely calling unhook if
|
|
# one of the bytes in JSON is 9c (ST) or other (CAN, SUB, ESC).
|
|
local msg=$(warp_hex_encode_string "$1")
|
|
# We send the InitShell hook via OSCs when on WSL and via DCSs otherwise.
|
|
if [ "$WARP_USING_WINDOWS_CON_PTY" = true ]; then
|
|
printf $OSC_START$DCS_JSON_MARKER$OSC_PARAM_SEPARATOR$msg$OSC_END
|
|
else
|
|
printf "%b%b%s%b" $DCS_START $DCS_JSON_MARKER $msg $DCS_END
|
|
fi
|
|
}
|
|
|
|
# Emit the ExitShell hook right before the remote shell exits so the Warp
|
|
# client can drop per-session resources (specifically the
|
|
# `ssh … remote-server-proxy` child that holds a multiplexed channel on
|
|
# the foreground ssh ControlMaster). This avoids a hang where the master
|
|
# waits on orphaned slave channels when the user ends their interactive
|
|
# session.
|
|
#
|
|
# Only relevant for remote SSH shells. WARP_IS_SSH is exported to "1"
|
|
# by `warp_ssh_helper` on the remote side of a Warp-managed SSH session
|
|
# and is unset everywhere else (local shells, subshells, docker
|
|
# sandboxes, etc.), so the hook only fires where a remote-server-proxy
|
|
# actually needs tearing down.
|
|
#
|
|
# Installed after warp_send_json_message is defined so the handler is
|
|
# callable the moment the hook is registered.
|
|
if [[ "$WARP_IS_SSH" == "1" ]]; then
|
|
__warp_emit_exit_shell() {
|
|
if [[ -n "$WARP_SESSION_ID" ]]; then
|
|
warp_send_json_message \
|
|
"{\"hook\": \"ExitShell\", \"value\": {\"session_id\": $WARP_SESSION_ID}}"
|
|
fi
|
|
}
|
|
# zshexit_functions is zsh's idiomatic exit-hook mechanism. We prefer
|
|
# it over `trap ... EXIT` for a few reasons:
|
|
# 1. It is additive: appending to the array composes with the
|
|
# existing `trap __warp_generator_pid_file_cleanup EXIT` above.
|
|
# Using `trap ... EXIT` here would replace that handler (zsh, like
|
|
# bash, only allows one trap per signal) and we would have to
|
|
# manually re-invoke the generator cleanup.
|
|
# 2. It runs in the main shell's context, unlike `trap ... EXIT`
|
|
# which can execute in a subshell under some zsh versions --
|
|
# problematic here because we need to write to the parent shell's
|
|
# controlling PTY to emit the ExitShell hook.
|
|
# 3. It also fires on SIGHUP-triggered exits, so a single
|
|
# registration covers both normal exit (exit, logout, Ctrl-D) and
|
|
# connection-drop cases.
|
|
zshexit_functions+=(__warp_emit_exit_shell)
|
|
fi
|
|
|
|
warp_maybe_send_reset_grid_osc() {
|
|
if [ "$WARP_USING_WINDOWS_CON_PTY" = true ]; then
|
|
printf $OSC_RESET_GRID
|
|
fi
|
|
}
|
|
|
|
# Hex-encodes the given argument and writes it to the PTY, wrapped in the OSC
|
|
# sequences for generator output.
|
|
#
|
|
# Usage:
|
|
# warp_send_generator_output_osc $my_output
|
|
#
|
|
# The payload of the OSC is "<content_length>;<hex-encoded content>".
|
|
#
|
|
# Note: If we're on windows, we send a reset grid to erase any cursor mutations caused by
|
|
# the in-band command.
|
|
warp_send_generator_output_osc() {
|
|
local hex_encoded_message=$(warp_hex_encode_string "$1")
|
|
local byte_count=$(LC_ALL="C"; printf "${#hex_encoded_message}")
|
|
printf "%b%i;%s%b" $OSC_START_GENERATOR_OUTPUT $byte_count $hex_encoded_message $OSC_END_GENERATOR_OUTPUT
|
|
warp_maybe_send_reset_grid_osc
|
|
}
|
|
|
|
# Executes the given command and writes its output to the pty wrapped in a
|
|
# DCS. The written DCS conforms to a basic schema including other metadata:
|
|
# "<command_id>;<command_output>;<exit_code>"
|
|
# where command_id is the ID given as the first argument to this function,
|
|
# exit_code is the exit code of the executed command, and command_output is
|
|
# the output itself.
|
|
_warp_execute_command() {
|
|
local command_id=$1
|
|
# This is shorthand to slice the 2nd-nth arguments of this function (i.e.
|
|
# the command array) into its own array. The first argument is the
|
|
# command_id stored above. Zsh arrays are 1-indexed, hence slicing from
|
|
# index 2 rather than index 1.
|
|
local -a command
|
|
command=("${@:2}")
|
|
# Declare raw_output prior to actually assigning it, because `local` is a command itself, which
|
|
# inteferes with capturing the exit code via $? (it overwrites $? with the 0, because the
|
|
# 'local' command always succeeds).
|
|
local raw_output
|
|
# Command substitution only captures stdout, so redirect stderr to stdout.
|
|
# Note that we use `eval` here to actually execute the command, because some shell syntax
|
|
# that may be used in the command might not be valid in a command substitution (e.g. the
|
|
# '$(<command>)' syntax).
|
|
# Also note that zsh variables can contain null charcters, so this doesn't require any special
|
|
# handling.
|
|
raw_output=$(eval "$command" 2>&1)
|
|
local exit_code=$?
|
|
warp_send_generator_output_osc "$command_id;$raw_output;$exit_code"
|
|
}
|
|
|
|
# Runs the given command in the background, records its PID in
|
|
# _WARP_GENERATOR_PIDS_STARTED_TMP_FILE, and adds its PID from the file when
|
|
# the job is completed.
|
|
_warp_run_generator_command_internal() {
|
|
_warp_execute_command "$@" &
|
|
# $! contains the PID of the most recently backgrounded command.
|
|
local pid=$!
|
|
echo $pid >> $_WARP_GENERATOR_PIDS_STARTED_TMP_FILE
|
|
wait $pid 2> /dev/null
|
|
|
|
# If the exit code of the backgrounded _warp_execute_command process is non-zero,
|
|
# the call to send the generator output failed (most likely because this is being
|
|
# executed in an old zsh version that doesn't support some syntax in
|
|
# _warp_execute_command function itself). In this case, send empty output with
|
|
# exit code 1 to indicate generator execution failed.
|
|
if [[ $? -ne 0 ]]; then
|
|
warp_send_generator_output_osc "$1;;1"
|
|
fi
|
|
|
|
# Add the PID to the completed generators PID file.
|
|
#
|
|
# The completed generator PIDs file may not exist if this generator was (by
|
|
# error) left running/not cancelled properly in warp_preexec.
|
|
if [[ -f $_WARP_GENERATOR_PIDS_COMPLETED_TMP_FILE ]]; then
|
|
echo $pid >> $_WARP_GENERATOR_PIDS_COMPLETED_TMP_FILE
|
|
fi
|
|
}
|
|
|
|
# Executes a generator command in the background, where the first argument is
|
|
# the "command ID" assigned by the Rust app and the second-nth arguments
|
|
# specify the command to be run.
|
|
#
|
|
# Note that the command string should be single-quoted so any variables are
|
|
# not substituted until the command string is actually evaluated.
|
|
#
|
|
# Usage:
|
|
# warp_run_generator_command <command_id> '<command> <arg1> ... <argn>'
|
|
warp_run_generator_command() {
|
|
# Setting this environment variable prevents warp_precmd from emitting the
|
|
# 'Block started' hook to the Rust app.
|
|
_WARP_GENERATOR_COMMAND=1
|
|
|
|
# Ensure the started and completed generator PID files exist.
|
|
if [[ -z $_WARP_GENERATOR_PIDS_STARTED_TMP_FILE || ! -f $_WARP_GENERATOR_PIDS_STARTED_TMP_FILE ]]; then
|
|
_WARP_GENERATOR_PIDS_STARTED_TMP_FILE="$(command -p mktemp)"
|
|
fi
|
|
if [[ -z $_WARP_GENERATOR_PIDS_COMPLETED_TMP_FILE || ! -f $_WARP_GENERATOR_PIDS_COMPLETED_TMP_FILE ]]; then
|
|
_WARP_GENERATOR_PIDS_COMPLETED_TMP_FILE="$(command -p mktemp)"
|
|
fi
|
|
|
|
# To minimize latency and prevent the user from being blocked from entering a command,
|
|
# cache the user's precmd_functions and only register warp_precmd. In the warp_precmd
|
|
# execution following this generator command, the user's precmd_functions are restored.
|
|
_USER_PRECMD_FUNCTIONS=($precmd_functions)
|
|
# Remove all precmd functions other than ones defined by us or p10k. If we remove the
|
|
# p10k precmd functions, p10k will see that we started running an in-band command but
|
|
# not know when it finishes, which causes a variety of undesirable side-effects.
|
|
precmd_functions=(${(M)precmd_functions:#*(warp|p9k)*})
|
|
|
|
(_warp_run_generator_command_internal "$@" &)
|
|
}
|
|
|
|
# Returns exit code 1 if the given argument starts with 'warp_run_generator_command'.
|
|
_is_warp_generator_command() {
|
|
[[ "$1" != *"warp_run_generator_command"* ]]
|
|
}
|
|
|
|
# Note that this is very performance sensitive code, so try not to
|
|
# invoke any external commands in here.
|
|
warp_preexec () {
|
|
local warp_escaped_command="$(warp_escape_json $1)"
|
|
warp_send_json_message "{\"hook\": \"Preexec\", \"value\": {\"command\": \"$warp_escaped_command\"}}"
|
|
warp_maybe_send_reset_grid_osc
|
|
|
|
# If this preexec is called for user command, kill ongoing generator command jobs and clean
|
|
# up the bookkeeping temp files used to bookkeep.
|
|
if _is_warp_generator_command "$1" && [[ -f $_WARP_GENERATOR_PIDS_STARTED_TMP_FILE ]] && [[ -f $_WARP_GENERATOR_PIDS_COMPLETED_TMP_FILE ]]
|
|
then
|
|
# Read PIDs from the started generators tmp file that are not present in
|
|
# the completed generators tmp file into a zsh array.
|
|
#
|
|
# The logic used to be the following:
|
|
#
|
|
# pids=($(command -p comm -23 $_WARP_GENERATOR_PIDS_STARTED_TMP_FILE $_WARP_GENERATOR_PIDS_COMPLETED_TMP_FILE))
|
|
#
|
|
# However, that requires that the files are sorted, which we do not enforce (the OS can assign PIDs
|
|
# in any order). While we could sort the files and then compare them, the files are expected to be
|
|
# small, so we avoid the overhead of spawning multiple processes and instead do the comparison
|
|
# manually.
|
|
completed_pids=(${(f)"$(<$_WARP_GENERATOR_PIDS_COMPLETED_TMP_FILE)"})
|
|
spawned_pids=(${(f)"$(<$_WARP_GENERATOR_PIDS_STARTED_TMP_FILE)"})
|
|
pids=(${spawned_pids:|completed_pids})
|
|
|
|
# If the array is not empty, kill the ongoing pids.
|
|
if [[ ! -z $pids ]]; then
|
|
# Surpress stderr output; kill writes to stderr if any of the given
|
|
# PIDS are not running (which might rarely be the case due to race
|
|
# conditions in checking which PIDS to cancel and this kill command.
|
|
(kill -9 $pids 2>&1) >/dev/null
|
|
fi
|
|
fi
|
|
}
|
|
|
|
# The git prompt's git commands are read-only and should not interfere with
|
|
# other processes. This environment variable is equivalent to running with `git
|
|
# --no-optional-locks`, but falls back gracefully for older versions of git.
|
|
# See git(1) for and git-status(1) for a description of that flag.
|
|
#
|
|
# We wrap in a local function instead of exporting the variable directly in
|
|
# order to avoid interfering with manually-run git commands by the user.
|
|
warp_git () {
|
|
GIT_OPTIONAL_LOCKS=0 command git "$@"
|
|
}
|
|
|
|
# Note that this is very performance sensitive code, so try not to
|
|
# invoke any external commands in here.
|
|
warp_precmd () {
|
|
# $? is the exit code of the last command executed in this process, which
|
|
# includes commands run within function definitions. So we capture the
|
|
# exit code from $? in precmd first, prior to executing any other
|
|
# commands so we can be assured that it represents the exit code of the
|
|
# previously run user command (as opposed to any of the commands executed
|
|
# in this function below).
|
|
local exit_code=$?
|
|
|
|
warp_send_json_message "{\"hook\": \"CommandFinished\", \"value\": {\"exit_code\": $exit_code, \"next_block_id\": \"precmd-$WARP_SESSION_ID-$((block_id++))\"}}"
|
|
warp_maybe_send_reset_grid_osc
|
|
|
|
# If this is being called for a generator command, short circuit and send an unpopulated
|
|
# precmd payload (except for pwd), since we don't re-render the prompt after generator commands
|
|
# are run.
|
|
if [ -n "$_WARP_GENERATOR_COMMAND" ]; then
|
|
# Restore the user's precmd_functions, since they were un-registered prior to executing
|
|
# the generator.
|
|
precmd_functions=($_USER_PRECMD_FUNCTIONS)
|
|
|
|
_WARP_GENERATOR_COMMAND=""
|
|
warp_send_json_message "{\"hook\": \"Precmd\", \"value\": {
|
|
\"pwd\": \"\",
|
|
\"ps1\": \"\",
|
|
\"git_head\": \"\",
|
|
\"git_branch\": \"\",
|
|
\"virtual_env\": \"\",
|
|
\"conda_env\": \"\",
|
|
\"node_version\": \"\",
|
|
\"session_id\": $WARP_SESSION_ID,
|
|
\"is_after_in_band_command\": true
|
|
}}"
|
|
return 0
|
|
fi
|
|
|
|
# If the files for tracking generator PIDs exist, clear them.
|
|
if [[ -n $_WARP_GENERATOR_PIDS_STARTED_TMP_FILE && -f $_WARP_GENERATOR_PIDS_STARTED_TMP_FILE ]]; then
|
|
echo "" > $_WARP_GENERATOR_PIDS_STARTED_TMP_FILE
|
|
fi
|
|
if [[ -n $_WARP_GENERATOR_PIDS_COMPLETED_TMP_FILE && -f $_WARP_GENERATOR_PIDS_COMPLETED_TMP_FILE ]]; then
|
|
echo "" > $_WARP_GENERATOR_PIDS_COMPLETED_TMP_FILE
|
|
fi
|
|
|
|
# Reset the custom kill-buffer binding as the user's zshrc (which is sourced after zshrc_warp)
|
|
# could have added a bindkey. This won't have any user-impact because these shortcuts are only run
|
|
# in the context of the zsh line editor, which isn't displayed in Warp.
|
|
bindkey -r '^P'
|
|
bindkey '^P' kill-buffer
|
|
|
|
# Reset the custom input-reporting binding as well, in case it was overridden
|
|
# by the user's zshrc.
|
|
# This is arbitrarily bound to ESC-i in all supported shells ("i" for input).
|
|
# Binding to ESC-1 caused bootstrap failures with vi keybindings.
|
|
bindkey -r '\ei'
|
|
bindkey '\ei' warp_report_input
|
|
|
|
# Introduce keybinding to switch prompt modes (PS1 vs built-in Warp prompt).
|
|
# This is arbitrarily bound to ESC-p in all supported shells ("p" for PS1),
|
|
# and we can change it to any other keybinding if needed.
|
|
bindkey -r '\ep'
|
|
bindkey '\ep' warp_change_prompt_modes_to_ps1
|
|
|
|
# Introduce keybinding to switch prompt modes (PS1 vs built-in Warp prompt).
|
|
# This is arbitrarily bound to ESC-w in all supported shells ("w" for Warp prompt),
|
|
# and we can change it to any other keybinding if needed.
|
|
bindkey -r '\ew'
|
|
bindkey '\ew' warp_change_prompt_modes_to_warp_prompt
|
|
|
|
local escaped_pwd
|
|
if [ -n "${WSL_DISTRO_NAME:-}" ]; then
|
|
# In WSL, avoid symlinks b/c on Windows `std::fs` is unable to resolve symlink inside WSL containers.
|
|
escaped_pwd=$(warp_escape_json "$(pwd -P)")
|
|
else
|
|
escaped_pwd=$(warp_escape_json "$PWD")
|
|
fi
|
|
|
|
local escaped_virtual_env=""
|
|
local escaped_conda_env=""
|
|
local escaped_node_version=""
|
|
local escaped_git_head=""
|
|
local escaped_git_branch=""
|
|
local escaped_kube_config=""
|
|
|
|
# Only fill these fields once we've finished bootstrapping, as the
|
|
# blocks created during the bootstrap process don't have visible
|
|
# prompts, and we don't want to invoke `git` before we've sourced the
|
|
# user's rcfiles and have a fully-populated PATH.
|
|
if [[ -n $WARP_BOOTSTRAPPED ]]; then
|
|
if [[ -n ${VIRTUAL_ENV:-} ]]; then
|
|
escaped_virtual_env=$(warp_escape_json $VIRTUAL_ENV)
|
|
fi
|
|
|
|
if [[ -n ${CONDA_DEFAULT_ENV:-} ]]; then
|
|
escaped_conda_env=$(warp_escape_json $CONDA_DEFAULT_ENV)
|
|
fi
|
|
|
|
# Get Node.js version if node is available and we're in a Node.js project
|
|
if command -v node > /dev/null 2>&1; then
|
|
# Check for package.json in current directory and parent directories
|
|
local current_dir="$PWD"
|
|
local found_package_json=false
|
|
local package_json_dir=""
|
|
while [[ "$current_dir" != "/" ]]; do
|
|
if [[ -f "$current_dir/package.json" ]]; then
|
|
found_package_json=true
|
|
package_json_dir="$current_dir"
|
|
break
|
|
fi
|
|
current_dir=$(dirname "$current_dir")
|
|
done
|
|
|
|
# Only show node version if package.json is within a git repository
|
|
if [[ "$found_package_json" = true ]]; then
|
|
local git_dir="$package_json_dir"
|
|
local in_git_repo=false
|
|
while [[ "$git_dir" != "/" ]]; do
|
|
if [[ -d "$git_dir/.git" ]]; then
|
|
in_git_repo=true
|
|
break
|
|
fi
|
|
git_dir=$(dirname "$git_dir")
|
|
done
|
|
|
|
if [[ "$in_git_repo" = true ]]; then
|
|
local node_version=$(node --version 2>/dev/null)
|
|
if [[ -n "$node_version" ]]; then
|
|
escaped_node_version=$(warp_escape_json "$node_version")
|
|
fi
|
|
fi
|
|
fi
|
|
fi
|
|
|
|
if [[ -n ${KUBECONFIG:-} ]]; then
|
|
escaped_kube_config=$(warp_escape_json $KUBECONFIG)
|
|
fi
|
|
|
|
# Note: We explicitly do _not_ use command -p here, as `git` is a command that can be
|
|
# installed in non-standard locations and so is not always available on the shell's
|
|
# default PATH. Instead, we rely on the active PATH, as if the user doesn't have git
|
|
# available to their session, it is unlikely they will be looking for git branch
|
|
# information from the prompt.
|
|
local git_branch=""
|
|
local git_head=""
|
|
if command -v git >/dev/null 2>&1; then
|
|
git_branch=$(warp_git symbolic-ref --short HEAD 2> /dev/null)
|
|
# The git branch the user is on, or the git commit hash if they're not on a branch.
|
|
git_head="${git_branch:-$(warp_git rev-parse --short HEAD 2> /dev/null)}"
|
|
fi
|
|
escaped_git_head=$(warp_escape_json "$git_head")
|
|
escaped_git_branch=$(warp_escape_json "$git_branch")
|
|
fi
|
|
|
|
|
|
# We also pass the shell's notion of `honor_ps1` to ensure it's synced correctly on the Warp-side for prompt handling.
|
|
# This is passed as a "real boolean" via the JSON payload (string interpolated into JSON string below).
|
|
local honor_ps1
|
|
if [[ "$WARP_HONOR_PS1" == "1" ]]; then
|
|
honor_ps1="true"
|
|
else
|
|
honor_ps1="false"
|
|
fi
|
|
|
|
local escaped_json="{\"hook\": \"Precmd\", \"value\": {
|
|
\"pwd\": \"$escaped_pwd\",
|
|
\"ps1\": \"\",
|
|
\"honor_ps1\": $honor_ps1,
|
|
\"rprompt\": \"\",
|
|
\"git_head\": \"$escaped_git_head\",
|
|
\"git_branch\": \"$escaped_git_branch\",
|
|
\"virtual_env\": \"$escaped_virtual_env\",
|
|
\"conda_env\": \"$escaped_conda_env\",
|
|
\"node_version\": \"$escaped_node_version\",
|
|
\"kube_config\": \"$escaped_kube_config\",
|
|
\"session_id\": $WARP_SESSION_ID
|
|
}}"
|
|
warp_send_json_message "$escaped_json"
|
|
}
|
|
|
|
warp_clear_on_next_block () {
|
|
warp_send_json_message '{"hook": "ClearOnNextBlock"}'
|
|
}
|
|
|
|
|
|
# Format a string value according to JSON syntax.
|
|
warp_escape_json () {
|
|
# Explanation of the sed replacements (each command is separated by a `;`):
|
|
# s/(["\\])/\\\1/g - Replace all double-quote (") and backslash (\) characters with the escaped versions (\" and \\)
|
|
# s/\b/\\b/g - Replace all backspace characters with \b
|
|
# s/\t/\\t/g - Replace all tab characters with \t
|
|
# s/\f/\\f/g - Replace all form feed characters with \f
|
|
# s/\r/\\r/g - Replace all carriage return characters with \r
|
|
# $!s/$/\\n/ - On every line except the last, insert the \n escape at the end of the line
|
|
# Note: sed acts line-by-line, so it doesn't see the literal newline characters to replace
|
|
#
|
|
# tr -d '\n' - Remove the literal newlines from the final output
|
|
#
|
|
# Additional note: In a shell script between single quotes ('), no escape sequences are interpreted.
|
|
# To work around that and insert the literal values into the regular expressions, we stop the single-quote,
|
|
# then add the literal using ANSI-C syntax ($'\t'), then start a new single-quote. That is the meaning
|
|
# behind the various `'$'\b''` blocks in the command. All of these separate strings are then concatenated
|
|
# together to form the full argument to send to sed.
|
|
#
|
|
# We also use 'command sed' to ensure that we aren't accidentally executing an alias or function named 'sed'
|
|
command -p sed -E 's/(["\\])/\\\1/g; s/'$'\b''/\\b/g; s/'$'\t''/\\t/g; s/'$'\f''/\\f/g; s/'$'\r''/\\r/g; $!s/$/\\n/' <<<"$*" | command -p tr -d '\n'
|
|
}
|
|
|
|
warp_escape_ps1 () {
|
|
# Turns out that the processed prompt is a complicated data structure that includes lots of
|
|
# information that's passed to the shell (including the actual shell, version, working directory
|
|
# and, well, the prompt itself). What is more, prompt can also include emojis - unicode characters
|
|
# that sometimes contain special bytes (ie. ST, CAN or SUB) that are otherwise used as unhook
|
|
# triggers for the precmd. Instead of escaping those and extracting the value of the prompt itself,
|
|
# we simply convert the entire data structure into a single line hex string, which Warp
|
|
# later decodes and sends to the grid to show the prompt.
|
|
# Note: before converting the prompt to a hex string, we remove the multi-line newlines and replace
|
|
# them with a single space (to avoid prompts that span multiple empty lines).
|
|
command -p tr '\n\n' ' ' <<< "$*" | command -p od -An -v -tx1 | command -p tr -d ' \n'
|
|
|
|
}
|
|
|
|
# warp_hex_encode_string encodes the entire DCS string (JSON) with od making it essentially
|
|
# a very long hexadecimal string.
|
|
# Afterwards it's decoded in rust and parsed as usual.
|
|
# Accepts one argument: DCS JSON string
|
|
warp_hex_encode_string () {
|
|
printf '%s' "$1" | command -p od -An -v -tx1 | command -p tr -d ' \n'
|
|
}
|
|
|
|
# We set precmd and preexec hooks in order to set the title for the idle
|
|
# terminal and the terminal running a command respectively. This is so we
|
|
# provide a reasonable default behavior in the case where the user doesn't
|
|
# have any shell scripts to set titles.
|
|
#
|
|
# If another shell script also has precmd/preexec hooks to set the title,
|
|
# we won't be clobbering them because our hooks will run first.
|
|
# If the WARP_DISABLE_AUTO_TITLE variable is set, we won't set the title at all.
|
|
# This way, setting the terminal title in a echo command and escape
|
|
# sequences will work (a single command to set the title normally will get
|
|
# clobbered by a precmd hook)."
|
|
function warp_title {
|
|
# Disable oh-my-zsh default title otherwise.
|
|
DISABLE_AUTO_TITLE="true"
|
|
|
|
setopt localoptions nopromptsubst
|
|
|
|
# Don't set the title if inside emacs, unless using vterm
|
|
[[ -n "${INSIDE_EMACS:-}" && "${INSIDE_EMACS:-}" != vterm ]] && return
|
|
|
|
title="%25<..<$1" # shorten the tab_title to 25 characters
|
|
print -Pn "\e]0;${title:q}\a" # set tab & window name (they're the same in Warp)
|
|
}
|
|
|
|
ZSH_THEME_TERM_TITLE_IDLE="%~"
|
|
ZSH_THEME_TERM_TAB_TITLE_IDLE_REMOTE="%m:%~"
|
|
|
|
# Runs before showing the prompt
|
|
function warp_set_title_idle_on_precmd {
|
|
# If the user wants to set the title using oh-my-zsh, they can
|
|
# set the WARP_DISABLE_AUTO_TITLE flag.
|
|
[[ "${WARP_DISABLE_AUTO_TITLE:-}" != true ]] || return
|
|
|
|
if [[ $WARP_IS_LOCAL_SHELL_SESSION == "1" ]]; then
|
|
warp_title "$ZSH_THEME_TERM_TITLE_IDLE"
|
|
else
|
|
warp_title "$ZSH_THEME_TERM_TAB_TITLE_IDLE_REMOTE"
|
|
fi
|
|
|
|
}
|
|
|
|
# Runs before executing the command
|
|
function warp_set_title_active_on_preexec {
|
|
# If the user wants to set the title using oh-my-zsh, they can
|
|
# set the WARP_DISABLE_AUTO_TITLE flag.
|
|
[[ "${WARP_DISABLE_AUTO_TITLE:-}" != true ]] || return
|
|
|
|
emulate -L zsh
|
|
setopt extended_glob
|
|
|
|
# split command into array of arguments
|
|
local -a cmdargs
|
|
cmdargs=("${(z)2}")
|
|
# if running fg, extract the command from the job description
|
|
if [[ "${cmdargs[1]}" = fg ]]; then
|
|
# get the job id from the first argument passed to the fg command
|
|
local job_id jobspec="${cmdargs[2]#%}"
|
|
# logic based on jobs arguments:
|
|
# http://zsh.sourceforge.net/Doc/Release/Jobs-_0026-Signals.html#Jobs
|
|
# https://www.zsh.org/mla/users/2007/msg00704.html
|
|
case "$jobspec" in
|
|
<->) # %number argument:
|
|
# use the same <number> passed as an argument
|
|
job_id=${jobspec} ;;
|
|
""|%|+) # empty, %% or %+ argument:
|
|
# use the current job, which appears with a + in $jobstates:
|
|
# suspended:+:5071=suspended (tty output)
|
|
job_id=${(k)jobstates[(r)*:+:*]} ;;
|
|
-) # %- argument:
|
|
# use the previous job, which appears with a - in $jobstates:
|
|
# suspended:-:6493=suspended (signal)
|
|
job_id=${(k)jobstates[(r)*:-:*]} ;;
|
|
[?]*) # %?string argument:
|
|
# use $jobtexts to match for a job whose command *contains* <string>
|
|
job_id=${(k)jobtexts[(r)*${(Q)jobspec}*]} ;;
|
|
*) # %string argument:
|
|
# use $jobtexts to match for a job whose command *starts with* <string>
|
|
job_id=${(k)jobtexts[(r)${(Q)jobspec}*]} ;;
|
|
esac
|
|
|
|
# override preexec function arguments with job command
|
|
if [[ -n "${jobtexts[$job_id]}" ]]; then
|
|
1="${jobtexts[$job_id]}"
|
|
2="${jobtexts[$job_id]}"
|
|
fi
|
|
fi
|
|
|
|
# cmd name only, or if this is sudo or ssh, the next cmd
|
|
local CMD="${1[(wr)^(*=*|sudo|ssh|mosh|rake|-*)]:gs/%/%%}"
|
|
local LINE="${2:gs/%/%%}"
|
|
|
|
warp_title "$CMD"
|
|
}
|
|
|
|
function warp_report_input {
|
|
local escaped_input="$(warp_escape_json "$BUFFER")"
|
|
warp_send_json_message "{ \"hook\": \"InputBuffer\", \"value\": { \"buffer\": \"$escaped_input\" } }"
|
|
# This prevents zsh from printing typeahead as background output after we've fetched it.
|
|
BUFFER=""
|
|
}
|
|
zle -N warp_report_input
|
|
|
|
function clear() {
|
|
warp_send_json_message "{\"hook\": \"Clear\", \"value\": {}}"
|
|
}
|
|
|
|
function warp_finish_update {
|
|
local update_id="$1"
|
|
warp_send_json_message "{ \"hook\": \"FinishUpdate\", \"value\": { \"update_id\": \"$update_id\"} }"
|
|
}
|
|
|
|
# Check if the warp apt source file has been renamed to `warpdotdev.list.distUpgrade` due to an ubuntu version update.
|
|
# If this occurred, we want to rename the source file back to `warpdotdev.list` to ensure updates can proceed.
|
|
# We purposefully skip this if either the `warpdotdev.list` file already exists (indicating that the user has already
|
|
# done this themselves) _or_ if a `warpdotdev.sources` file exists (which is the new Deb822 format for source files).
|
|
# The `.sources` file could only exist if a user manually created it; Ubuntu doesn't create one automatically for the
|
|
# warp source file due to a bug in its update flow where it considers our source file to be "invalid" because it
|
|
# contains a `signed-by` key.
|
|
function warp_handle_dist_upgrade {
|
|
local source_file_name="$1"
|
|
|
|
eval "$(command apt-config shell APT_SOURCESDIR 'Dir::Etc::sourceparts/d')"
|
|
|
|
if [[ ! -e $APT_SOURCESDIR$source_file_name.list && \
|
|
! -e $APT_SOURCESDIR$source_file_name.sources && \
|
|
-e $APT_SOURCESDIR$source_file_name.list.distUpgrade ]]; then
|
|
# DO NOT DO THIS. We should never run a command for user with `sudo`. The only reason this is safe here is because
|
|
# we insert this function into the input for the user to determine if they want to execute (we never run it on
|
|
# their behalf without their permission). To be transparent about what is being executed with sudo, we echo out the
|
|
# command we're about to run.
|
|
echo "Executing: sudo cp \"$APT_SOURCESDIR$source_file_name.list.distUpgrade\" \"$APT_SOURCESDIR$source_file_name.list\""
|
|
sudo cp "$APT_SOURCESDIR$source_file_name.list.distUpgrade" "$APT_SOURCESDIR$source_file_name.list"
|
|
fi
|
|
}
|
|
|
|
# Check whether the prompt-related variables have OSC prompt marker sequences,
|
|
# and if not, wrap them with the appropriate markers so that we can direct the
|
|
# prompt bytes to the appropriate grids.
|
|
function warp_update_prompt_vars() {
|
|
# 133;A and 133;B are standard prompt marker OSCs. We also follow the standard for the rprompt OSC below.
|
|
# See https://learn.microsoft.com/en-us/windows/terminal/tutorials/shell-integration and
|
|
# https://gitlab.freedesktop.org/terminal-wg/specifications/-/merge_requests/6/diffs for details.
|
|
local prompt_prefix=$'\e]133;A\a'
|
|
local rprompt_prefix=$'\e]133;P;k=r\a'
|
|
local prompt_suffix=$'\e]133;B\a'
|
|
if [[ "$WARP_HONOR_PS1" != "1" ]] && [ "$WARP_USING_WINDOWS_CON_PTY" = true ]; then
|
|
local suffix="$prompt_suffix$OSC_RESET_GRID"
|
|
else
|
|
local suffix="$prompt_suffix"
|
|
fi
|
|
local prompt_prefix_with_cursor_marker="%{$prompt_prefix"
|
|
local suffix_with_cursor_marker="$suffix%}"
|
|
|
|
local prompt_prefix_with_cursor_marker_surrounded="%{$prompt_prefix%}"
|
|
local suffix_with_cursor_marker_surrounded="%{$suffix%}"
|
|
|
|
# Clear the user-defined prompt again, if using Warp's built-in prompt, before the command
|
|
# is rendered as it could have been reset by the user's zshrc or by setting
|
|
# the variable on the command line. This is used for same-line prompt and leads to the temporary
|
|
# product behavior of Warp prompt switches only taking effect in new sessions.
|
|
# Certain prompt plugins like p10k can reset the prompt to a non-empty value, after we've initially unset it.
|
|
# Confirm that it is unset, if using built-in Warp prompt (update prompt vars is forced to run as the last precmd fn).
|
|
if [[ "$WARP_HONOR_PS1" != "1" ]]; then
|
|
# If the PROMPT has its original value (i.e. we haven't modified it yet), we save it to SAVED_PROMPT
|
|
# so we can recover it, via bindkey, if we switch back from Warp prompt to PS1 (intra-session).
|
|
if [[ "$PROMPT" != "%{$prompt_prefix"*"%}" ]]; then
|
|
SAVED_PROMPT=$PROMPT
|
|
fi
|
|
# Similarly, we also save the RPROMPT if it has its original value, for later use in intra-session switching.
|
|
if [[ "${RPROMPT:-}" != "%{$rprompt_prefix$suffix%}" ]]; then
|
|
SAVED_RPROMPT=${RPROMPT:-}
|
|
fi
|
|
|
|
# We don't unset the $PROMPT since we want to show the lprompt preview in the edit prompt modal (and onboarding blocks).
|
|
# Note that the prompt grid is separate from the combined prompt/command grid and ONLY used for prompt previews, in the
|
|
# case of the combined grid being enabled.
|
|
# Clear the rprompt, so it doesn't accidentally appear in selections/any other relevant logic.
|
|
unset RPROMPT
|
|
fi
|
|
|
|
|
|
if [[ -n "$PROMPT" ]]; then
|
|
# We may have previously modified the prompt to add prompt and cursor
|
|
# markers. If they exist, we remove the first occurrence of the prefix
|
|
# and the last occurrence of the suffix, which should be the ones that
|
|
# Warp has added, to avoid duplicating the prefix and suffix. Shell
|
|
# parameter expansion is used to remove the first and last occurences.
|
|
# Specifically note that virtualenvs can add content to the prompt, so we need to
|
|
# remove the markers before re-adding them.
|
|
# https://www.gnu.org/software/bash/manual/html_node/Shell-Parameter-Expansion.html
|
|
if [[ "$PROMPT" == *"$prompt_prefix_with_cursor_marker_surrounded"* ]]; then
|
|
local preceding_prefix=${PROMPT%%$prompt_prefix_with_cursor_marker_surrounded*}
|
|
local following_prefix=${PROMPT#*$prompt_prefix_with_cursor_marker_surrounded}
|
|
PROMPT=$preceding_prefix$following_prefix
|
|
fi
|
|
if [[ "$PROMPT" == *"$suffix_with_cursor_marker_surrounded"* ]]; then
|
|
local preceding_suffix=${PROMPT%$suffix_with_cursor_marker_surrounded*}
|
|
local following_suffix=${PROMPT##*$suffix_with_cursor_marker_surrounded}
|
|
PROMPT=$preceding_suffix$following_suffix
|
|
fi
|
|
|
|
# In the case of prompt previews, we may have non-fully surrounded markers that we should remove too!
|
|
# Specifically, we surround the ENTIRE prompt with cursor markers, to prevent the shell from moving its
|
|
# internal cursor position when printing the prompt in the prompt preview grid. This is different
|
|
# than the usual case, where we only surround the OSCs (prefix/suffix) with cursor markers.
|
|
if [[ "$PROMPT" == *"$prompt_prefix_with_cursor_marker"* ]]; then
|
|
local preceding_prefix=${PROMPT%%$prompt_prefix_with_cursor_marker*}
|
|
local following_prefix=${PROMPT#*$prompt_prefix_with_cursor_marker}
|
|
PROMPT=$preceding_prefix$following_prefix
|
|
fi
|
|
if [[ "$PROMPT" == *"$suffix_with_cursor_marker"* ]]; then
|
|
local preceding_suffix=${PROMPT%$suffix_with_cursor_marker*}
|
|
local following_suffix=${PROMPT##*$suffix_with_cursor_marker}
|
|
PROMPT=$preceding_suffix$following_suffix
|
|
fi
|
|
|
|
ORIGINAL_PROMPT=$PROMPT
|
|
PROMPT="$prompt_prefix$PROMPT$suffix"
|
|
fi
|
|
|
|
if [[ -n "${RPROMPT:-}" && "${RPROMPT:-}" != *"$rprompt_prefix"* ]]; then
|
|
ORIGINAL_RPROMPT=$RPROMPT
|
|
RPROMPT="$rprompt_prefix$RPROMPT$suffix"
|
|
fi
|
|
|
|
# The "%{" and "%}" indicate to zsh that the sequence between the markers
|
|
# should not change the position of the cursor. This is necessary to
|
|
# ensure proper rendering of the command grid when the combined prompt +
|
|
# command length is longer than a single row. When the prompt has a
|
|
# non-zero width, the redraw of the initial line when it exceeds the max
|
|
# columns leads to undesired artifacts in the command grid.
|
|
# Note that we only need cursor markers for the prefix/suffix when using a combined prompt &
|
|
# command grid.
|
|
# If we are using the Warp prompt, we pass a "hidden left prompt" to the prompt
|
|
# preview grid (the hidden prompt grid) with cursor markers surrounding the entire prompt.
|
|
if [[ "$WARP_HONOR_PS1" != "1" ]]; then
|
|
if [[ "$PROMPT" != "%{$prompt_prefix$ORIGINAL_PROMPT$suffix%}" ]]; then
|
|
# We purposefully surround this entire prompt with cursor markers to prevent
|
|
# the shell from moving its internal state of the cursor position, for purposes
|
|
# of printing the command with the Warp prompt.
|
|
# Note that the Warp prompt is always ABOVE the combined grid in finished blocks
|
|
# (same line prompt only affects the input editor with Warp prompt, not
|
|
# finished blocks).
|
|
PROMPT="%{$prompt_prefix$ORIGINAL_PROMPT$suffix%}"
|
|
fi
|
|
# Otherwise, if we are using the PS1, we use the normal prompt markers.
|
|
else
|
|
if [[ "$PROMPT" != "%{"*"%}" ]]; then
|
|
# We surround the non-printable OSCs with cursor markers to make sure the shell does NOT
|
|
# account for them when keeping track of its internal cursor position.
|
|
PROMPT="%{$prompt_prefix%}$ORIGINAL_PROMPT%{$suffix%}"
|
|
fi
|
|
fi
|
|
|
|
if [[ "${RPROMPT:-}" != "%{"*"%}" ]]; then
|
|
RPROMPT="%{${RPROMPT:-}%}"
|
|
fi
|
|
|
|
# Ensure that this is always the last precmd hook. This prevents any other precmd hook, which might
|
|
# modify $PROMPT, from interfering with our prompt-escaping logic.
|
|
#
|
|
# Remove warp_update_prompt_vars from the precmd_functions list and then re-append it to ensure it's
|
|
# ordered last.
|
|
precmd_functions=("${(@)precmd_functions[@]:#warp_update_prompt_vars}")
|
|
precmd_functions+=(warp_update_prompt_vars)
|
|
}
|
|
|
|
# Switches to PS1 prompt by restoring the prompt/rprompt to their original values and flipping
|
|
# WARP_HONOR_PS1 to "1" (they had originally been unset for the Warp prompt). Resets the prompt,
|
|
# forcing a re-print.
|
|
function warp_change_prompt_modes_to_ps1() {
|
|
PROMPT="$SAVED_PROMPT"
|
|
RPROMPT="$SAVED_RPROMPT"
|
|
WARP_HONOR_PS1=1
|
|
|
|
warp_update_prompt_vars
|
|
zle .reset-prompt
|
|
}
|
|
|
|
# The following line creates a new widget with ZLE (the Zsh line editor) with the custom function above,
|
|
# so we can reference this when we register it with a bindkey.
|
|
zle -N warp_change_prompt_modes_to_ps1
|
|
|
|
# Switches to Warp prompt by flipping WARP_HONOR_PS1 to "0", which will result
|
|
# in unsetting the PROMPT variables to avoid a double prompt. Resets the prompt, forcing
|
|
# a re-print.
|
|
function warp_change_prompt_modes_to_warp_prompt() {
|
|
WARP_HONOR_PS1=0
|
|
|
|
warp_update_prompt_vars
|
|
zle .reset-prompt
|
|
}
|
|
|
|
# The following line creates a new widget with ZLE (the Zsh line editor) with the custom function above,
|
|
# so we can reference this when we register it with a bindkey.
|
|
zle -N warp_change_prompt_modes_to_warp_prompt
|
|
|
|
# The SSH logic only applies to local sessions, because we don't yet have support for bootstrapping
|
|
# recursive SSH sessions.
|
|
if [[ $WARP_IS_LOCAL_SHELL_SESSION == "1" ]]; then
|
|
# This helper function determines whether the user's ssh arguments imply
|
|
# creation of a non-interactive session or otherwise would conflict with
|
|
# our SSH wrapper. Returns 0 for an interactive session; >0 otherwise.
|
|
function is_interactive_ssh_session() {
|
|
ARGS=() # this array holds any positional arguments
|
|
while [ $# -gt 0 ]; do
|
|
# Initialize this to 1 before each call, as per getopts documentation.
|
|
OPTIND=1
|
|
# Parse through all ssh options, as defined in the ssh man pages.
|
|
while getopts :1246AaCfgKkMNnqsTtVvXxYyb:c:D:e:F:i:L:l:m:O:o:p:R:S:W:w: OPTION; do
|
|
case $OPTION in
|
|
# -T disables pty allocation (aka a non-interactive session)
|
|
T) return 1;;
|
|
# -W implies -T
|
|
W) return 1;;
|
|
# The user provided an invalid option; kick it to real ssh.
|
|
\?) return 1;;
|
|
# The user omitted a required argument; kick it to real ssh.
|
|
:) return 1;;
|
|
esac
|
|
done
|
|
[ $? -eq 0 ] || return 2 # getopts failed
|
|
[ $OPTIND -gt $# ] && break # we reached the end of the parameters
|
|
|
|
shift "$((OPTIND - 1))" # skip all options processed so far
|
|
ARGS+=($1) # save first non-option argument (a.k.a. positional argument)
|
|
shift # remove saved arg
|
|
done
|
|
|
|
# If there is more than one positional argument, the user is attempting to
|
|
# run a command, not start an interactive session. If there is less than
|
|
# one positional argument, the user should be shown the usage text.
|
|
if [[ ${#ARGS[@]} -ne 1 ]]; then
|
|
return 1
|
|
fi
|
|
}
|
|
|
|
function warp_ssh_helper() {
|
|
# Hex-encode the ZSH environment script we use to bootstrap remote zsh b/c it contains control characters
|
|
# We decode on the SSH server using xxd if its available, otherwise fall back to a for-loop over each byte
|
|
# and use printf to convert back to plaintext
|
|
local zsh_env_script=$(printf '%s' 'unsetopt ZLE; unset RCS; unset GLOBAL_RCS; WARP_SESSION_ID="$(command -p date +%s)$RANDOM"; WARP_USING_WINDOWS_CON_PTY=@@USING_CON_PTY_BOOLEAN@@; _hostname=$(command -pv hostname >/dev/null 2>&1 && command -p hostname 2>/dev/null || command -p uname -n); _user=$(command -pv whoami >/dev/null 2>&1 && command -p whoami 2>/dev/null || echo $USER); _msg=$(printf "{\"hook\": \"InitShell\", \"value\": {\"session_id\": $WARP_SESSION_ID, \"shell\": \"zsh\", \"user\": \"%s\", \"hostname\": \"%s\"}}" "$_user" "$_hostname" | command -p od -An -v -tx1 | command -p tr -d '"'"' \n'"'"'); printf '"'"'\e]9278;d;%s\x07'"'"' $_msg; unset _hostname _user _msg' | command -p od -An -v -tx1 | command -p tr -d ' \n')
|
|
|
|
# Keep remote commands up-to-date with shell.rs & bash.sh.
|
|
# Note that in this command, we're passing a string to the remote shell. Any variable expansions need to be
|
|
# escaped with "''" to avoid the local shell from expanding them before they're passed to the remote shell.
|
|
# We check the SHELL env var and use shell string manipulation to get the contents after the last slash to
|
|
# determine what shell is the login shell on the remote machine. We perform a preliminary check to see if
|
|
# the remote shell is the Bourne shell to avoid asking it to parse later lines that use syntax it doesn't
|
|
# support.
|
|
command ssh -o ControlMaster=yes -o ControlPath=$SSH_SOCKET_DIR/$WARP_SESSION_ID \
|
|
-t "${@:1}" \
|
|
"
|
|
export TERM_PROGRAM='WarpTerminal'
|
|
# Mark the remote side of a Warp-managed SSH session so the bootstrap
|
|
# body can distinguish it from local shells. Used to gate the ExitShell
|
|
# hook which tears down the remote-server-proxy subprocess.
|
|
export WARP_IS_SSH='1'
|
|
test -n '$WARP_CLIENT_VERSION' && export WARP_CLIENT_VERSION='$WARP_CLIENT_VERSION'
|
|
# Only forward the protocol version if it was set locally (i.e. the HOANotifications feature flag is on).
|
|
test -n '$WARP_CLI_AGENT_PROTOCOL_VERSION' && export WARP_CLI_AGENT_PROTOCOL_VERSION='$WARP_CLI_AGENT_PROTOCOL_VERSION'
|
|
hook="'$(printf "{\"hook\": \"SSH\", \"value\": {\"socket_path\": \"'$SSH_SOCKET_DIR/$WARP_SESSION_ID'\", \"remote_shell\": \"%s\"}}" "${SHELL##*/}" | command -p od -An -v -tx1 | command -p tr -d " \n")'"
|
|
printf '$OSC_START$DCS_JSON_MARKER$OSC_PARAM_SEPARATOR%s$OSC_END' "'$hook'"
|
|
|
|
if test "'"${SHELL##*/}" != "bash" -a "${SHELL##*/}" != "zsh"'"; then
|
|
# Emulate the SSHD logic to print the MotD. Because the Warp SSH wrapper passes
|
|
# a command to run, SSHD does a quiet login, updating utmp and other login
|
|
# state, but not printing the MotD. For bash and zsh, this is instead handled
|
|
# by our bootstrap script.
|
|
if test ! -e "'$HOME/.hushlogin'"; then
|
|
# This uses an if-else chain instead of a for-loop to avoid expansion issues on older shells.
|
|
if test -r /etc/motd; then
|
|
command -p cat /etc/motd
|
|
elif test -r /run/motd; then
|
|
command -p cat /run/motd
|
|
elif test -r /run/motd.dynamic; then
|
|
command -p cat /run/motd.dynamic
|
|
elif test -r /usr/lib/motd; then
|
|
command -p cat /usr/lib/motd
|
|
elif test -r /usr/lib/motd.dynamic; then
|
|
command -p cat /usr/lib/motd.dynamic
|
|
fi
|
|
fi
|
|
# Likewise, emulate a login shell by sourcing /etc/profile
|
|
if test -r /etc/profile; then
|
|
. /etc/profile
|
|
fi
|
|
exec "'$SHELL'"
|
|
fi
|
|
|
|
case "'${SHELL##*/}'" in
|
|
bash)
|
|
exec -a bash bash --rcfile <(echo '"'
|
|
command -p stty raw
|
|
HISTCONTROL=ignorespace
|
|
HISTIGNORE=" *"
|
|
WARP_SESSION_ID="$(command -p date +%s)$RANDOM"
|
|
WARP_HONOR_PS1="'$WARP_HONOR_PS1'"
|
|
_hostname=$(command -pv hostname >/dev/null 2>&1 && command -p hostname 2>/dev/null || command -p uname -n)
|
|
_user=$(command -pv whoami >/dev/null 2>&1 && command -p whoami 2>/dev/null || echo $USER)
|
|
_msg=$(printf "{\"hook\": \"InitShell\", \"value\": {\"session_id\": $WARP_SESSION_ID, \"shell\": \"bash\", \"user\": \"%s\", \"hostname\": \"%s\"}}" "$_user" "$_hostname" | command -p od -An -v -tx1 | command -p tr -d " \n")'"
|
|
WARP_USING_WINDOWS_CON_PTY=@@USING_CON_PTY_BOOLEAN@@
|
|
if [[ "'$OS'" == Windows_NT ]]; then WARP_IN_MSYS2=true; else WARP_IN_MSYS2=false; fi
|
|
printf '\''"'\e]9278;d;%s\x07'"'\'' \""'$_msg'"\"'
|
|
unset _hostname _user _msg
|
|
)
|
|
;;
|
|
zsh) WARP_TMP_DIR="'$(command -p mktemp -d warptmp.XXXXXX)'"
|
|
local ZSH_ENV_SCRIPT='$zsh_env_script'
|
|
local WARP_HONOR_PS1='$WARP_HONOR_PS1'
|
|
if [[ "'$?'" == 0 ]]; then
|
|
if command -pv xxd >/dev/null 2>&1; then
|
|
echo "'$ZSH_ENV_SCRIPT'" | command -p xxd -p -r > "'$WARP_TMP_DIR'"/.zshenv
|
|
else
|
|
for i in {0..\$((\${#ZSH_ENV_SCRIPT} - 1))..2}; do
|
|
builtin printf "'"\x${ZSH_ENV_SCRIPT:$i:2}"'"
|
|
done > "'$WARP_TMP_DIR'"/.zshenv
|
|
fi
|
|
else
|
|
echo \"Failed to bootstrap warp. Continuing with a non-bootstrapped shell.\"
|
|
fi
|
|
TMPPREFIX="'$HOME/.zshtmp-'" WARP_SSH_RCFILES="'${ZDOTDIR:-$HOME}'" WARP_HONOR_PS1="'$WARP_HONOR_PS1'" ZDOTDIR="'$WARP_TMP_DIR'" exec -l zsh -g $TRACE_FLAG_IF_WARP_SHELL_DEBUG_MODE
|
|
;;
|
|
esac
|
|
"
|
|
}
|
|
|
|
function ssh() {
|
|
if is_interactive_ssh_session "$@"; then
|
|
warp_send_json_message "{\"hook\": \"PreInteractiveSSHSession\", \"value\": {}}"
|
|
|
|
# If the SSH wrapper is not enabled for this session, don't use it.
|
|
if [ "$WARP_USE_SSH_WRAPPER" = "1" ]; then
|
|
local TRACE_FLAG_IF_WARP_SHELL_DEBUG_MODE=""
|
|
if [[ "$WARP_SHELL_DEBUG_MODE" == "1" ]]; then
|
|
TRACE_FLAG_IF_WARP_SHELL_DEBUG_MODE="-x"
|
|
fi
|
|
warp_ssh_helper "$@"
|
|
else
|
|
command ssh "$@"
|
|
fi
|
|
else
|
|
command ssh "$@"
|
|
fi
|
|
}
|
|
fi
|
|
|
|
# Send a precmd message to the terminal to differentiate between the warp
|
|
# bootstrap logic pasted into the PTY and the output of shell startup files.
|
|
warp_precmd
|
|
|
|
# Before calling rcfiles, print the MotD if this is a login shell. Normally,
|
|
# login(1) or pam_motd(8) would do this. However, Warp does not use login(1)
|
|
# for local sessions and for remote sessions, SSHD thinks it is starting a
|
|
# non-interactive session, so it does not print PAM messages.
|
|
if [[ -o login && ! -e "$HOME/.hushlogin" ]]; then
|
|
for motd_file in /etc/motd /run/motd /run/motd.dynamic /usr/lib/motd /usr/lib/motd.dynamic; do
|
|
if [[ -r "$motd_file" ]]; then
|
|
command -p cat "$motd_file"
|
|
break
|
|
fi
|
|
done
|
|
fi
|
|
|
|
# We need to restore the stty before any user bootstrap files are evaluated
|
|
# in case they ask for user input
|
|
setopt ZLE
|
|
|
|
# If powerlevel instant prompt is on, we need to disable it because it
|
|
# interferes with warp bootstrapping. The functionality is part of warp anyways.
|
|
typeset -g POWERLEVEL9K_INSTANT_PROMPT=off
|
|
|
|
# Add the Warp title precmd functions before the bootstrap sequence is sourced so that a user's custom tab title
|
|
# behavior is respected over Warp's.
|
|
precmd_functions+=(warp_set_title_idle_on_precmd)
|
|
preexec_functions+=(warp_set_title_active_on_preexec)
|
|
|
|
# Clean up after ourselves, restore ZDOTDIR, and remove the temporary directory in the ssh case.
|
|
# We need to do this before the rcfiles are sourced, since rcfiles can reference ZDOTDIR.
|
|
# In this case, we created a temp dir that starts with our template prefix and set the ZDOTDIR
|
|
# to that dir.
|
|
# Note that when called with a template, mktemp will work in the local directory, not the tmp filesystem.
|
|
TEMPLATE_PREFIX="warptmp."
|
|
if [[ -n $ZDOTDIR ]]; then
|
|
if [[ ${ZDOTDIR:0:${#TEMPLATE_PREFIX}} == $TEMPLATE_PREFIX ]]; then
|
|
command -p rm -r "$ZDOTDIR"
|
|
|
|
# Restore ZDOTDIR. Note that if it was originally unset, it'd be home instead of unset.
|
|
ZDOTDIR=$WARP_SSH_RCFILES
|
|
fi
|
|
fi
|
|
|
|
# Load the EPOCHREALTIME variable from the zsh/datetime module so we can
|
|
# accurately measure how long it takes to source the user's rcfiles.
|
|
zmodload -F zsh/datetime +p:EPOCHREALTIME >/dev/null 2>&1
|
|
|
|
# Make sure we force the locale used for number formatting to "C", to avoid
|
|
# issues in locales that use a comma as the decimal separator.
|
|
local rcfiles_start_time="$(LC_ALL="C"; echo $EPOCHREALTIME)"
|
|
|
|
# This reflects the bootstrap sequence in a login shell. We want to
|
|
# Do other shell startup first so we can ensure Warp goes last.
|
|
|
|
# If this is a subshell, the user and system RC files have already been sourced.
|
|
if [[ -z $WARP_IS_SUBSHELL ]]; then
|
|
if [[ -e ${ZDOTDIR:-$HOME}/.zshenv ]]; then
|
|
source ${ZDOTDIR:-$HOME}/.zshenv;
|
|
fi
|
|
if [[ -e /etc/zprofile ]]; then
|
|
source /etc/zprofile;
|
|
fi
|
|
if [[ -e ${ZDOTDIR:-$HOME}/.zprofile ]]; then
|
|
source ${ZDOTDIR:-$HOME}/.zprofile;
|
|
fi
|
|
if [[ -e /etc/zshrc ]]; then
|
|
source /etc/zshrc;
|
|
fi
|
|
if [[ -e ${ZDOTDIR:-$HOME}/.zshrc ]]; then
|
|
source ${ZDOTDIR:-$HOME}/.zshrc;
|
|
fi
|
|
if [[ -e /etc/zlogin ]]; then
|
|
source /etc/zlogin;
|
|
fi
|
|
if [[ -e ${ZDOTDIR:-$HOME}/.zlogin ]]; then
|
|
source ${ZDOTDIR:-$HOME}/.zlogin;
|
|
fi
|
|
fi
|
|
|
|
local rcfiles_end_time="$(LC_ALL="C"; echo $EPOCHREALTIME)"
|
|
|
|
# If the user is running powerlevel10k and they selected "sparse" for the "Prompt Spacing"
|
|
# option, this var will be true. It tells p10k to output an extra newline in its precmd function
|
|
# which visually separates commands. These are generally undesired in Warp, since blocks provide
|
|
# enough visual separation. Although generally benign, this causes an issue on Windows when
|
|
# ConPTY is involved. The extra newline is output by p10k's precmd which runs after Warp's
|
|
# precmd, i.e. after the "reset grid" sequence. It ends up causing Warp's grid content to be out
|
|
# of sync with ConPTY, causing cursor positioning problems.
|
|
if [[ ${POWERLEVEL9K_PROMPT_ADD_NEWLINE:-} == true ]]; then
|
|
POWERLEVEL9K_PROMPT_ADD_NEWLINE=false
|
|
fi
|
|
|
|
# Returns exit code 1 if the command starts with 'warp_run_generator_command'.
|
|
#
|
|
# This is intended to be used as a zshaddhistory function to prevent in-band
|
|
# generators from being added to the zsh history file.
|
|
# zshaddhistory functions.
|
|
#
|
|
# See https://zsh.sourceforge.io/Doc/Release/Functions.html for more context
|
|
# on the zshaddhistory hook.
|
|
_warp_zshaddhistory() {
|
|
_is_warp_generator_command "$1"
|
|
}
|
|
|
|
# Register this zshaddhistory hook after the user's RC files have been sourced,
|
|
# to ensure that it gets added (the user's RC files could entirely reset the
|
|
# hook function array).
|
|
zshaddhistory_functions+=(_warp_zshaddhistory)
|
|
|
|
# Append additional PATH entries if provided via WARP_PATH_APPEND. This is after the user's RC
|
|
# files are sourced in case they reset PATH (/etc/profile on Debian does this, for example).
|
|
if [[ -n "${WARP_PATH_APPEND:-}" ]]; then
|
|
export PATH="$PATH:$WARP_PATH_APPEND"
|
|
unset WARP_PATH_APPEND
|
|
fi
|
|
|
|
local -a shell_plugins
|
|
|
|
if [[ ${precmd_functions[(I)_p9k_precmd]} != 0 ]]; then
|
|
# The variable P9K_VERSION was added in the first version of p10k that
|
|
# supports Warp, so if it is non-empty, the user is on a supported version.
|
|
if [[ -z "${P9K_VERSION:-}" ]]; then
|
|
# If the user is running an unsupported version of p10k, remove the precmd
|
|
# hook entirely to prevent the p10k prompt from appearing in typeahead and
|
|
# in the command grid.
|
|
precmd_functions=(${precmd_functions:#_p9k_precmd})
|
|
shell_plugins+=(p10k_unsupported)
|
|
else
|
|
shell_plugins+=(p10k)
|
|
fi
|
|
fi
|
|
|
|
# Remove the pure precmd hook. Pure uses zsh-async to load
|
|
# the prompt asynchronously, which means that the prompt can be
|
|
# re-rendered (and entered as typeahead characters) once the async
|
|
# callback completes. This means that any sort of `unset PS1` or
|
|
# `unset PROMPT` calls in precmd don't work if the callback
|
|
# completes after the `precmd`.
|
|
if [[ ${precmd_functions[(I)prompt_pure_precmd]} != 0 ]]; then
|
|
precmd_functions=(${precmd_functions:#prompt_pure_precmd})
|
|
shell_plugins+=(pure)
|
|
fi
|
|
|
|
# Read through shell options to determine if the user has enabled vi mode.
|
|
shell_options="$(setopt)"
|
|
for i in ${(f)shell_options}; do
|
|
if [[ "$i" == "vi" ]]; then
|
|
vi_mode_in_opts=1
|
|
fi
|
|
done
|
|
|
|
NVIM_RE='([[:space:]]|^)nvim([[:space:]]|$)'
|
|
|
|
ZLE_BINDKEY="$(bindkey -lL main)"
|
|
|
|
# Check if the shell's native "vi" option has been set.
|
|
if [[ -n "${vi_mode_in_opts:-}" ]]; then
|
|
shell_plugins+=(vi)
|
|
|
|
# Check if nvim has been set as the default editor.
|
|
# We don't check for vi/vim because it already the default in Linux,
|
|
# which means it is set even for non-vim users who haven't deliberately
|
|
# chosen it.
|
|
elif [[ "${EDITOR:-}" =~ "$NVIM_RE" ]] || [[ "${VISUAL:-}" =~ "$NVIM_RE" ]]; then
|
|
shell_plugins+=(vi)
|
|
|
|
# Check if the zsh line editor bindings include vi-related commands.
|
|
elif [[ "$ZLE_BINDKEY" = *viins* ]] || [[ "$ZLE_BINDKEY" = *vicmd* ]]; then
|
|
shell_plugins+=(vi)
|
|
|
|
# Check if the zsh-vi-mode plugin is being used.
|
|
elif [[ ${precmd_functions[(I)zvm_init]} != 0 ]]; then
|
|
shell_plugins+=(vi)
|
|
fi
|
|
|
|
if kernel_name="$(uname)"; then
|
|
if [[ "$kernel_name" == "Darwin" ]]; then
|
|
os_category="MacOS"
|
|
elif [[ "$kernel_name" == "Linux" ]]; then
|
|
os_category="Linux"
|
|
default_os_release_filepath="/etc/os-release"
|
|
fallback_os_release_filepath="/usr/lib/os-release"
|
|
# We first try /etc/os-release and then try /usr/lib/os-release as a fallback.
|
|
if test -f "$default_os_release_filepath"; then
|
|
os_release_file="$default_os_release_filepath"
|
|
elif test -f "$fallback_os_release_filepath"; then
|
|
os_release_file="$fallback_os_release_filepath"
|
|
fi
|
|
if test -f "$os_release_file"; then
|
|
linux_distribution="$(cat $os_release_file | sed -nE 's/^NAME="(.*)"$/\1/p')"
|
|
fi
|
|
fi
|
|
fi
|
|
|
|
precmd_functions+=(warp_precmd warp_update_prompt_vars)
|
|
preexec_functions+=(warp_preexec)
|
|
|
|
WARP_BOOTSTRAPPED=1
|
|
|
|
# Unset the prompt environment variable: Warp doesn't render the user's default prompt.
|
|
# We explicitly unset this for performance optimizations and so that the we can read the
|
|
# command directly from the command grid without having to parse the prompt.
|
|
export CONDA_CHANGEPS1=false
|
|
|
|
warp_update_prompt_vars
|
|
|
|
# Set history to flush after every command
|
|
setopt share_history
|
|
|
|
# Overrides compadd so that we can hook into parts of the completion stack
|
|
# where richer completions data is available.
|
|
#
|
|
# Adapted from https://github.com/Valodim/zsh-capture-completion/blob/740fce754393513d57408bc585fde14e4404ba5a/capture.zsh#L51
|
|
#
|
|
# Licensed under the MIT license - Copyright (c) 2015 Vincent Breitmoser.
|
|
function compadd () {
|
|
# If we're not expecting to override compadd or if any of -O, -A or -D are given,
|
|
# then just delegate to the main compadd.
|
|
if [[ -z "${COMPADD_OVERRIDE}" || "${COMPADD_OVERRIDE}" == "false" || ${@[1,(i)(-|--)]} == *-(O|A|D)\ * ]]; then
|
|
# if that is the case, just delegate and leave
|
|
builtin compadd "$@"
|
|
return $?
|
|
fi
|
|
|
|
# be careful with namespacing here, we don''t want to mess with stuff that
|
|
# should be passed to compadd!
|
|
typeset -a __hits __dscr __tmp
|
|
|
|
# do we have a description parameter?
|
|
# note we don''t use zparseopts here because of combined option parameters
|
|
# with arguments like -default- confuse it.
|
|
if (( $@[(I)-d] )); then # kind of a hack, $+@[(r)-d] doesn''t work because of line noise overload
|
|
# next param after -d
|
|
__tmp=${@[$[${@[(i)-d]}+1]]}
|
|
# description can be given as an array parameter name, or inline () array
|
|
if [[ $__tmp == \(* ]]; then
|
|
eval "__dscr=$__tmp"
|
|
else
|
|
__dscr=( "${(@P)__tmp}" )
|
|
fi
|
|
fi
|
|
|
|
# capture completions by injecting -A parameter into the compadd call.
|
|
# this takes care of matching for us.
|
|
builtin compadd -A __hits -D __dscr "$@"
|
|
|
|
setopt localoptions norcexpandparam extendedglob
|
|
|
|
# extract prefixes and suffixes from compadd call. we can''t do zsh''s cool
|
|
# -r remove-func magic, but it''s better than nothing.
|
|
typeset -A apre hpre hsuf asuf
|
|
# Parse compadd options, based on the documentation. Unused flags are left
|
|
# in the array extra_args. There are additional arguments we don't check
|
|
# for here, but they all take arguments, so wouldn't interfere with parsing
|
|
# of consolidated flags (e.g.: -Qf being parsed as -Q and -f).
|
|
zparseopts -E -a extra_args - f=dirsuf P:=apre p:=hpre S:=asuf s:=hsuf a k q Q e n U l 1 2 C
|
|
|
|
# Change dirsuf to store whether or not the -f flag was provided.
|
|
integer dirsuf=${#dirsuf}
|
|
|
|
# just drop
|
|
[[ -n $__hits ]] || return
|
|
|
|
# this is the point where we have all matches in $__hits and all
|
|
# descriptions in $__dscr!
|
|
|
|
# display all matches
|
|
local dsuf dscr
|
|
for i in {1..$#__hits}; do
|
|
# add a dir suffix?
|
|
(( dirsuf )) && [[ -d $__hits[$i] ]] && dsuf=/ || dsuf=
|
|
# description to be displayed afterwards
|
|
(( $#__dscr >= $i )) && dscr="${${__dscr[$i]}##$__hits[$i] #}" || dscr=""
|
|
|
|
local match="$__hits[$i]$dsuf"
|
|
|
|
print -n "\e]9280;C"$OSC_PARAM_SEPARATOR$match$OSC_END
|
|
print -n "\e]9280;D?description"$OSC_PARAM_SEPARATOR$dscr$OSC_END
|
|
done
|
|
}
|
|
|
|
# Marks the start of completions generation using a custom OSC.
|
|
# Expects the `format` as the first positional argument.
|
|
function warp_mark_start_of_completions () {
|
|
printf '\e]9280;A;%s\a' $1
|
|
}
|
|
|
|
function warp_mark_start_of_completions_for_list_choices () {
|
|
warp_mark_start_of_completions 'raw'
|
|
}
|
|
|
|
function warp_mark_start_of_completions_for_compadd_override () {
|
|
warp_mark_start_of_completions 'incrementally_typed'
|
|
}
|
|
|
|
# Marks the end of completions generation using a custom OSC.
|
|
function warp_mark_end_of_completions () {
|
|
printf '\e]9280;B\a'
|
|
}
|
|
|
|
# The main logic for generating completions.
|
|
function warp_main_completer () {
|
|
# We want all the results listed.
|
|
compstate[list_max]=-1
|
|
|
|
# Delegate to `_generic` to kick off the completion pipeline. We call `_generic` instead of `_main_complete` to
|
|
# ensure the proper completion context is set. Internally, `_generic` will call `_main_complete`.
|
|
# We fake the number of columns to some large, arbitrary amount as a best-effort approach
|
|
# to mitigate description truncation.
|
|
COLUMNS=500 _generic
|
|
}
|
|
|
|
# Lists completion matches via the builtin list-choices widget.
|
|
function warp_complete_via_list_choices () {
|
|
# Start by reading in the completion buffer.
|
|
zle warp_read_completion_buffer
|
|
|
|
# Adding a post-hook here is not helpful because
|
|
# it doesn't tell us when the completions have all been _listed_.
|
|
# So instead, we unset ALWAYS_LAST_PROMPT so that the prompt
|
|
# is always returned and then use prompt markers to determine
|
|
# when completions output is finished.
|
|
unsetopt ALWAYS_LAST_PROMPT
|
|
compprefuncs=( warp_mark_start_of_completions_for_list_choices )
|
|
zle warp_complete_via_list_choices_internal
|
|
BUFFER=""
|
|
}
|
|
|
|
# Gathers completion matches by overriding compadd
|
|
# and emitting the completions directly there.
|
|
function warp_complete_via_compadd_override () {
|
|
# Start by reading in the completion buffer.
|
|
zle warp_read_completion_buffer
|
|
|
|
compprefuncs=( warp_mark_start_of_completions_for_compadd_override )
|
|
comppostfuncs=( warp_mark_end_of_completions )
|
|
COMPADD_OVERRIDE=true
|
|
zle warp_complete_via_compadd_override_internal
|
|
BUFFER=""
|
|
unset COMPADD_OVERRIDE
|
|
}
|
|
|
|
function warp_read_completion_buffer() {
|
|
# Read data from the terminal into a temporary variable and set it as the
|
|
# current zle buffer. We want to prevent anything visible from being sent
|
|
# to the terminal (it would be treated as background output), so we use -s
|
|
# to suppress echoing and send an OSC as the synchronization signal (so the
|
|
# terminal knows when to send the input buffer that needs completions).
|
|
local TEMP
|
|
IFS= read -d $'\4' -s "$(echo -e "TEMP?\e]9280;P\a")" < /dev/tty
|
|
BUFFER="$TEMP"
|
|
|
|
# We push and pop the buffer stack to get zle to properly treat the buffer
|
|
# as the data for the completer run. Without this, the completer will
|
|
# attempt to complete on an empty string.
|
|
#
|
|
# We use DCS start and end markers to swallow the line editor redraw that
|
|
# occurs when we call `get-line`; we want to make sure it doesn't get
|
|
# shown in a background block. The "a" after the DCS start sequence
|
|
# ensures we don't try to parse this as a JSON-encoded hook.
|
|
echo -n "${DCS_START}a"
|
|
zle push-line
|
|
zle get-line
|
|
echo -n "$DCS_END"
|
|
}
|
|
zle -N warp_read_completion_buffer
|
|
|
|
# Registers the custom completion widgets and hooks them up to
|
|
# the main logic for completing.
|
|
zle -C warp_complete_via_list_choices_internal list-choices warp_main_completer
|
|
zle -C warp_complete_via_compadd_override_internal list-choices warp_main_completer
|
|
|
|
# Registers widgets for generating native-shell completions
|
|
# and sets up bindkeys to trigger them.
|
|
#
|
|
# We use intermediate widgets rather than binding
|
|
# directly to the completion widgets so that we can
|
|
# access normal widget features (e.g. BUFFER).
|
|
zle -N warp_complete_via_list_choices
|
|
zle -N warp_complete_via_compadd_override
|
|
bindkey '^X' warp_complete_via_list_choices
|
|
bindkey '^Y' warp_complete_via_compadd_override
|
|
|
|
# Set style for the list-choices approach
|
|
zstyle ':completion:warp_complete_via_list_choices:*' verbose no
|
|
zstyle ':completion:warp_complete_via_list_choices:*' list-packed yes
|
|
zstyle ':completion:warp_complete_via_list_choices:*' list-rows-first yes
|
|
zstyle ':completion:warp_complete_via_list_choices:*' list-prompt ''
|
|
|
|
# Avoid grouping. Under certain conditions, grouping can cause options to be printed
|
|
# after the compostfunc hook is called.
|
|
zstyle ':completion:warp_complete_via_compadd_override:*' list-grouped false
|
|
zstyle ':completion:warp_complete_via_compadd_override:*' insert-tab false
|
|
zstyle ':completion:warp_complete_via_compadd_override:*' verbose yes
|
|
# Setting list-separator to an empty string avoids an extra `--` from being added
|
|
# between the hit and the description.
|
|
zstyle ':completion:warp_complete_via_compadd_override:*' list-separator ''
|
|
|
|
|
|
function warp_bootstrapped () {
|
|
# Note that for now we don't support dynamically changing HISTFILE within a session.
|
|
local escaped_histfile="$(warp_escape_json $HISTFILE)"
|
|
|
|
# The output of `alias` can include control characters that need to be escaped.
|
|
local escaped_aliases="$(warp_escape_json "`alias`")"
|
|
local escaped_abbrs=""
|
|
local env_var_names="$(warp_escape_json "`echo ${(k)parameters[(R)*export*]}`")"
|
|
local function_names="$(warp_escape_json "`builtin print -l -- ${(ok)functions}`")"
|
|
local escaped_builtins="$(warp_escape_json "`builtin print -l -- ${(ok)builtins}`")"
|
|
local escaped_keywords="$(warp_escape_json "`builtin print -l -- ${(ok)reswords}`")"
|
|
|
|
local escaped_path="$(warp_escape_json "$PATH")"
|
|
|
|
local escaped_shell_plugins="$(warp_escape_json "`builtin print -l -- ${shell_plugins}`")"
|
|
|
|
# The list of options enabled for the current shell.
|
|
local shell_options="$(warp_escape_json "`setopt`")"
|
|
|
|
local escaped_editor="$(warp_escape_json "$EDITOR")"
|
|
local escaped_shell_path="$(warp_escape_json "${commands[zsh]}")"
|
|
local escaped_json="{\"hook\": \"Bootstrapped\", \"value\": {\"histfile\": \"$escaped_histfile\", \"shell\": \"zsh\", \"home_dir\": \"$HOME\", \"path\": \"$escaped_path\", \"editor\": \"$escaped_editor\", \"env_var_names\": \"$env_var_names\", \"abbreviations\": \"$escaped_abbrs\", \"aliases\": \"$escaped_aliases\", \"function_names\": \"$function_names\", \"builtins\": \"$escaped_builtins\", \"keywords\": \"$escaped_keywords\", \"shell_version\": \"$ZSH_VERSION\", \"shell_options\": \"$shell_options\", \"rcfiles_start_time\": \"$rcfiles_start_time\", \"rcfiles_end_time\": \"$rcfiles_end_time\", \"shell_plugins\": \"$escaped_shell_plugins\", \"os_category\": \"$os_category\", \"linux_distribution\": \"$linux_distribution\", \"wsl_name\": \"${WSL_DISTRO_NAME:-}\", \"shell_path\": \"$escaped_shell_path\"}}"
|
|
warp_send_json_message "$escaped_json"
|
|
}
|
|
warp_bootstrapped
|
|
fi
|